Temporarily Disabling A Scheduled Task; Forcing A Preload Task To Start Immediately - 3Com SUPERSTACK 3 WEBCACHE 3000 User Manual

198 C 12: P
HAPTER RELOADING
Temporarily Disabling
a Scheduled Task
Forcing a Preload Task
to Start Immediately
C
ONTENT
10 Select the frequency of the preload task from Every Hour, Every Day, Every
Week or Once.
11 Select the start time from the at: drop-down box. The preload task will
start at the specified time of day but will not have a guaranteed finish
time since it is conditional on the Web site and the performance of the
Internet. Allocate plenty of time to run the preload task so the Web
content is available when you need it.
12 Select the start day from the on drop-down box. The day will be grayed
out if you previously selected a preload frequency of Every Hour or Every
Day.
13 Click OK to save your changes or Cancel to return without saving.
If the preload task has not finished before its next scheduled start time,
the Webcache will ignore the new schedule and complete the current
schedule. The preload task will then attempt to run again at the next
scheduled start time.
To disable a scheduled task without deleting it:
1 Log in to the Web interface.
2 Click Caching on the toolbar.
3 Select Content Preload > Preload Tasks > Preload Tasks to see the Edit
Preload Tasks window.
4 Select a Preload Task from the list.
5 Click Disable.
If there is an Enable button displayed on the window when you have
selected a task then the task has already been disabled. Click Enable to
re-enable the task.
6 Click OK to return to the Web interface.
To force a Preload to start immediately:
1 Log in to the Web interface.
2 Click Caching on the toolbar.
3 Select Content Preload > Preload Tasks > Preload Tasks to see the Edit
Preload Tasks window.