3Com SUPERSTACK 3 WEBCACHE 3000 User Manual page 213

There are two community strings, one for each of the following type of
access:
Public — A network management station that makes SNMP requests
I
using the correct Public community string will gain read-only access to
the Webcache to view its status or configuration information.
Private — A network management station that makes SNMP
I
requests using the correct Private community string will gain read and
write access to the Webcache to change its status or configuration.
3Com recommends that you change the default community strings to
prevent unwanted users from gaining access to the Webcache.
To change the Public and Private community strings using the Web
interface:
1 Log in to the Web interface.
2 Click Device on the Toolbar.
3 Select System > Management > Community in the Navigation Tree. The
SNMP Community screen is displayed.
4 Enter the community string for Private (Set/Write) requests to the
Webcache in the Private (Set/Write) SNMP community field. The default
string is
private
5 Enter the community string for Public (Get/Read) requests to the
Webcache in the Public (Get/Read) SNMP community field. The default
string is .
public
You can enter a maximum of 30 characters for each community string.
You can select Reset Community Strings to change both the Private and
Public community strings back to their default values.
.
SNMP Traps 213