3Com SUPERSTACK 3 WEBCACHE 3000 User Manual page 68

68 C 2: I
HAPTER NSTALLING THE
W
EBCACHE
Figure 21 Fitting a Rack-Mounting Rail to the Rear of the Rack
4 Attach the rack-mounting rail to the front of the rack. To do this:
a Insert two screws through aligned openings in the front plate, rack
and rack-mounting rail as shown in
b Tighten the screws with a suitable screwdriver.
Figure 22 Fitting a Rack-Mounting Rail to the Front of the Rack
5 Slide the rack-mounting brackets on the sides of the Webcache into the
rack-mounting rails.
6 Secure the front of the Webcache to the rack with the captive
thumbscrews, as shown in
rack-nuts (not supplied).
Figure 22.
Figure 23. Screw the thumbscrews into