Creating A Web Client Blocking List - 3Com SUPERSTACK 3 WEBCACHE 3000 User Manual

Creating a Web Client
Blocking List
Allow all except — to allow all clients to access the Web except for
I
those you specifically block.
6 Click OK.
You can create a list of the IP addresses or IP address ranges of the client
machines for which you want to change the default Web Client Blocking
behavior:
If you selected Deny all except when setting up Web Client Blocking
I
then the addresses on the Web Client Blocking List will be allowed
access to the Web.
If you selected Allow all except when setting up Web Client Blocking
I
then the addresses on the Web Client Blocking List will be blocked
from accessing the Web.
The Web Client Blocking List can be created in one of the following ways:
Manually entering each IP address or IP address range in the Edit List
I
screen.
Loading an existing list of IP addresses or IP address ranges from an
I
external text file in the Load List From File screen.
A combination of the above methods.
I
Manually Entering an IP Address into the Web Client Blocking List
To manually enter an IP address or IP address range in the Web Client
Blocking List:
1 Log in to the Web interface.
2 Click Content Filter on the Toolbar.
3 Select Webcache Filtering > Web Client Blocking > Edit List in the
Navigation Tree.
4 Enter the IP address or IP address range of the client machine(s) that you
want to add to the list in the Enter the IP Address or Address Range to
add to the Web Client Blocking List field, and click Add. Repeat this for
each IP address for which you want to change the default Web Client
Blocking behavior.
You must follow all of the rules listed in
when adding an entry in the Web Client Blocking List.
Web Client Blocking
"IP Address Rules" on
163
page 27