The Status Tables - 3Com SUPERSTACK 3 WEBCACHE 3000 User Manual

Symbol

The Status Tables

Behavior
The icon, if shown with a Red border, indicates that the cache storage
device is present but has failed.
This is also indicated by the Cache Storage Status LED on the front panel of
the Webcache being Yellow.
This symbol is only shown on the Webcache 3000 Device Mimic, as the
Webcache 1000 does not have accessible cache storage devices.
An email notification and an SNMP trap are both sent to inform you that a
cache storage device has failed; for further information, see
System Events"
You should remove the failed cache storage device and return it to 3Com
for replacement. For further information, see
Storage Device"
Clicking Summary, Device, Caching or Content Filter on the Toolbar will
display Status Tables in the Information Area. The Summary View displays
most of the Status Tables and the Device Caching and Content Filter
views display relevant Status Tables below the Device Mimic.
Device Summary (Appears in Summary and Device views)
The Device Summary table displays the following information for the
Webcache. It shows the DNS Name, Type, Software Version, Hardware
Version, IP Address, MAC Address, Boot Version, Product Number, Serial
Number, Up Time and System Time of the Webcache.
Enclosure Summary (Appears in Summary and Device views)
The Enclosure Summary table displays the speed of the CPU fan and the
temperature inside the Webcache indicating when either of these fall
outside acceptable limits.
Caching Summary (Appears in Summary and Caching views)
The Caching Summary table shows the Deployment Mode, Proxy Port,
Transparent Ports WCCP status and the method and status of Access
Logging.
Caching Statistics Summary (Appears in Summary and Caching
views)
The Caching Statistics Summary table shows the current Hit Rate and
Request Rate of the Webcache.
page 214
on .
page 314
on .
The Information Area
"Automatic
"Replacing a Failed Cache
99