The BootWare program is upgraded together with the Comware application version. When you
upgrade the Comware application program, the system automatically checks whether the current
BootWare version is compliant with the Comware application and upgrades the BootWare version
if needed.
Before upgrading the software of your access controller module, check the current BootWare
version and Comware application version to make sure that the correct file is used for the upgrade.
For the association between the Comware application version and the BootWare version, refer to
the hardware and software compatibility matrix in Release Notes.
Software Upgrade Flow
Figure 5-1 Software upgrade flowchart
System startup
Choose the correct
Choose an upgrade method
Upgrade by
BootWare
using
Xmodem
Implement upgrade
BootWare Menus
BootWare Main Menu
Upon power-on or reboot of the LSQM1WCMB0, the console terminal connected with the access
controller module first displays the following information:
System start booting...
Upgrade
N
program?
Y
upgrade file
Upgrade by
Upgrade by
BootWare
CLI using
using TFTP/
TFTP/FTP
FTP
Upgrade
complete
5-3