Appendix C Common Software Operations; Accessing The Bios Setup Utility - H3C SecCenter CSAP-SA Installation Manual

Appendix C Common software operations

Figures in this section are for illustration only. The software interface might differ from your screen
display.

Accessing the BIOS setup utility

CAUTION:
Before restarting the server, save all the data to avoid data loss.
By default, no boot password, administrator password, and user password are configured. You can
access the BIOS setup utility directly.
To access the BIOS setup utility:
1. Connect a mouse, keyboard, and monitor to the server, or launch a remote console from HDM.
2. Start or restart the server. To start or restart the server from a remote console:
To start the server from a remote console, click Power > Power On or the

To restart the server from a remote console, click Power > Force System Reset.

3. If the system requires a password during the start process, enter the administrator password or
user password.
If you forget the administrator password or user password, power off the server, turn on system
maintenance switch 2, and then power on the server. The system clears administrator and user
passwords for the BIOS at the restart. For more information about system maintenance
switches, see
Figure 13 Entering the administrator password or user password
4. Press Del or Esc on the BIOS boot screen as shown in
"System maintenance switches."
Figure
1
icon.
14.