H3C WIRELESSACCESSCOTROLLER S7500E Installation Manual page 17
Access controller module
Hide thumbs
Also See for WIRELESSACCESSCOTROLLER S7500E:
- Command manual (1565 pages) ,
- Operation manual (1344 pages) ,
- Command reference manual (368 pages)
Table of Contents
Advertisement
Figure 4-2 Set up a new connection
Type a name, H3C in this example, for the new connection in the Name field and click OK. The
Connect To dialog box appears, as shown below.
Figure 4-3 Connect To dialog box
2)
Select a serial port from the Connect using drop-down list. Be sure to select the serial port to
which the console cable is actually connected. Then click OK.
3)
Set the port parameters as shown below.
4-2
Advertisement
Table of Contents
