H3C WIRELESSACCESSCOTROLLER S7500E Installation Manual page 31

Access controller module

Hide thumbs Also See for WIRELESSACCESSCOTROLLER S7500E:

Table of Contents

|<4> 57600

|<5> 115200*

|<0> Exit

===========================================================================

Enter your choice(0-5):

Select 0 to return to the BootWare operation serial interface submenu.

======================<BOOTWARE OPERATION SERIAL SUB-MENU>=====================

|<1> Update Full BootWare

|<2> Update Extend BootWare

|<3> Update Basic BootWare

|<4> Modify Serial Interface Parameter

|<0> Exit To Main Menu

===============================================================================

Enter your choice(0-4):

Select 1 in the BootWare operation serial interface submenu. The following prompt appears:

Please Start To Transfer File, Press <Ctrl+C> To Exit.

Waiting ...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

Select Transfer > Send file... in the HyperTerminal window. The following dialog box appears:

Figure 5-5 Send File dialog box

Click Browse... to select the application file to be downloaded, and select Xmodem from the

Protocol drop-down list. Then click Send. The following dialog box appears:

5-10

Table of Contents

Lsqm1wcmb0