H3C WIRELESSACCESSCOTROLLER S7500E Installation Manual page 25

Then, the following information appears:
Booting Normal Extend BootWare....
The Extend BootWare is self-decompressing.................
Done!
****************************************************************************
*
*
*
****************************************************************************
Copyright (c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.
Compiled Date
CPU Type
CPU L1 Cache
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
BootWare Size
cfa0 Size
CPLD Version
PCB Version
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
The extended boot menu is referred to as BootWare main menu in this manual unless otherwise stated.
At the prompt above, press Ctrl+B. The system prompts you for the password:
Please input BootWare password:
You have three chances to enter the BootWare password (the initial password is null). If you fail to enter
the correct password three times in a row, the system will be halted and you can only restart the system.
After you provide the correct password, the system enters the BootWare main menu:
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
=============================<EXTEND-BOOTWARE MENU>============================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Modify BootWare Password
|<6> Skip Current System Configuration
H3C WCMB BootWare, Version 1.08
: Sep 24 2007
: BCM1125H
: 32KB
: 600MHz
: DDR SDRAM
: 1024MB
: 166MHz
: 512KB
: 256MB
: 003
: Ver.C
5-4
*
*
*
|
|
|
|
|
|