Setting Application And Configuration File Types; Setting File Types Through Bootware Menu Options - H3C WIRELESSACCESSCOTROLLER S7500E Installation Manual

Figure 5-10 Set up a software maintenance environment (LSQM1WCMB0 as FTP)
PC
(FTP Server)
2) Run the FTP server program on the PC, set the file path, and set the username and password for
the LSQM1WCMB0.
3) Configure the IP addresses for both sides, which must be on the same subnet. For example, set
the IP address of the FTP server to 192.168.0.1, and that of the LSQM1WCMB0 access controller
module's management Ethernet interface to 192.168.0.2. Then use ping to verify the network
connectivity.
4) Log in to the FTP server through the console terminal connected with the LSQM1WCMB0.
<H3C>ftp 192.168.0.1
Trying 192.168.0.1 ...
Press CTRL+K to abort
Connected to 192.168.0.1.
220 3Com 3CDaemon FTP Server Version 2.0
User(192.168.0.1:(none)):guest
331 User name ok, need password
Password:
230 User logged in
[ftp]
5) Maintain the software of the LSQM1WCMB0.
Use the get and put commands to download and backup files.
[ftp]get main.bin main.bin
cfa0:/main.bin has been existing. Overwrite it?[Y/N]:y
200 PORT command successful.
150 File status OK ; about to open data connection
226 Closing data connection; File transfer successful.
FTP: 21254592 byte(s) received in 138.256 second(s), 153.00K byte(s)/sec.
[ftp]put main.bin main.bin
200 PORT command successful.
150 File status OK ; about to open data connection
226 Closing data connection; File transfer successful.
FTP: 21254592 byte(s) sent in 36.520 second(s), 581.00Kbyte(s)/sec.
[ftp]quit
221 Service closing control connection

Setting Application and Configuration File Types

Setting File Types Through BootWare Menu Options

You can use the file control submenu to display and modify file types.
LSQM1WCMB0
(FTP Client)
Console
Ethernet
5-20