H3C WIRELESSACCESSCOTROLLER S7500E Installation Manual page 29

4) Choose File > Properties. In the Properties dialog box, click Configure... and select 115,200 in
the Bits per second drop-down list box.
Figure 5-3 Modify the baud rate
5) Select Call > Call to reestablish the call connection.
Figure 5-4 Reconnect the call
6) Then, press Enter in the serial interface submenu. The system prompts the current baud rate and
returns to the parent menu.
==============================<Enter Serial SubMenu>===========================
|Note:the operating device is cfa0
|<1> Download Application Program To SDRAM And Run
|<2> Update Main Application File
|<3> Update Backup Application File
|<4> Update Secure Application File
|<5> Modify Serial Interface Parameter
|<0> Exit To Main Menu
===============================================================================
Enter your choice(0-5):
5-8
|
|
|
|
|
|
|