H3C WIRELESSACCESSCOTROLLER S7500E Installation Manual page 42

Access controller module
Hide thumbs Also See for WIRELESSACCESSCOTROLLER S7500E:
Table of Contents

Advertisement

Select 4 in the BootWare main menu to enter the file control submenu. The following information
appears:
=================================<File CONTROL>================================
|Note:the operating device is cfa0
|<1> Display All File(s)
|<2> Set Application File type
|<3> Delete File
|<0> Exit To Main Menu
===============================================================================
Enter your choice(0-3):
Viewing all files
Select 1 in the file control submenu. The following information appears:
Display all file(s) in cfa0:
'M' = MAIN
'B' = BACKUP
===============================================================================
|NO. Size(B)
Time
|1
10021476
Jan/20/2034 10:12:36 M
|2
795
Jan/20/2006 11:58:50 N/A
===============================================================================
Setting application file types
1)
Select 2 in the file control submenu. The following information appears:
'M' = MAIN
'B' = BACKUP
===============================================================================
|NO. Size(B)
Time
|1
20710792
Jan/20/2034 10:12:36 M
|0
Exit
===============================================================================
Enter file No:
2)
Enter the file number at the prompt above. In this example, type 1 for main.bin, and press Enter.
The system prompts you to specify a new file type:
Modify the file attribute:
===============================================================================
|<1> +Main
|<2> -Main
|<3> +Backup
|<4> -Backup
|<0> Exit
===============================================================================
Enter your choice(0-4)
3)
Select 1 for +Main (set to M), 2 for –Main (remove the current M attribute), 3 for +Backup (set to B),
or 4 for –Backup (remove the current type B setting). For details about the file types, refer to section
"Application Files" on page 5-1.
'S' = SECURE
'N/A' = NOT ASSIGNED
Type
Name
cfa0:/main.bin
cfa0:/startup.cfg
'S' = SECURE
'N/A' = NOT ASSIGNED
Type
Name
cfa0:/main.bin
5-21
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lsqm1wcmb0

Table of Contents