H3C WIRELESSACCESSCOTROLLER S7500E Installation Manual page 33
Access controller module
Hide thumbs
Also See for WIRELESSACCESSCOTROLLER S7500E:
- Command manual (1565 pages) ,
- Operation manual (1344 pages) ,
- Command reference manual (368 pages)
Table of Contents
Advertisement
2)
Select 4 in the BootWare operation submenu to enter the BootWare operation Ethernet interface
submenu:
=====================<BOOTWARE OPERATION ETHERNET SUB-MENU>====================
|<1> Update Full BootWare
|<2> Update Extend BootWare
|<3> Update Basic BootWare
|<4> Modify Ethernet Parameter
|<0> Exit To Main Menu
===============================================================================
Enter your choice(0-4):
3)
Select 4 in the BootWare operation Ethernet interface submenu. The system prompts you to
modify the network parameters.
============================<ETHERNET PARAMETER SET>===========================
|Note:
'.' = Clear field.
|
'-' = Go to previous field.
|
Ctrl+D = Quit.
===============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name
Target File Name
Server IP Address
Local IP Address
Gateway IP Address
After modification of the parameters, the system display returns to the BootWare operation Ethernet
interface submenu.
=====================<BOOTWARE OPERATION ETHERNET SUB-MENU>====================
|<1> Update Full BootWare
|<2> Update Extend BootWare
|<3> Update Basic BootWare
|<4> Modify Ethernet Parameter
|<0> Exit To Main Menu
===============================================================================
Enter your choice(0-4):
4)
Select 1 in the BootWare operation serial interface submenu, and respond to the following
prompts:
Loading.................................................................................
........................................................................................
.............................Done!
20710792 bytes downloaded!
Updating Basic BootWare? [Y/N]Y
Updating Basic BootWare................Done!
Updating Extend BootWare? [Y/N]Y
Updating Extend BootWare..............Done!
After download of the BootWare program file, the system display returns to the BootWare operation
Ethernet interface submenu.
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>==================
|<1> Update Full BootWare
:main.bin
main.bin
:192.168.0.1
:192.168.0.2
:192.168.0.1
5-12
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Advertisement
Table of Contents
