H3C WIRELESSACCESSCOTROLLER S7500E Installation Manual page 40

% Start FTP server
3) Add an authorized FTP username and password.
[H3C]local-user guest
[H3C-luser- guest]service-type ftp
[H3C-luser- guest]password simple 123456
4) Enter ftp in the MD-DOS prompt window to start the FTP client application on the PC, and log in to
the LSQM1WCMB0.
C:\Documents and Settings\Administrator>ftp
ftp>
ftp> open 192.168.0.2
Connected to 192.168.0.2.
220 FTP service ready.
User (192.168.0.2:(none)): guest
331 Password required for guest
Password:
Successfully connected to the server
5) Backup and restore files.
To backup main.bin on the LSQM1WCMB0 to the PC, do the following:
ftp> binary
200 Type set to I.
ftp> lcd c:\temp
Local directory now C:\temp.
ftp> get main.bin main.bin
200 Port command okay.
150 Opening BINARY mode data connection for main.bin.
226 Transfer complete.
ftp: 14323376 bytes received in 16.81Seconds 851.87Kbytes/sec.
To restore the backup file to the LSQM1WCMB0, do the following:
ftp> put main.bin main.bin
200 Port command okay.
150 Opening BINARY mode data connection for main.bin.
226 Transfer complete.
ftp: 14323376 bytes sent in 8.29Seconds 1727.37Kbytes/sec.
ftp> quit
221 Server closing.
Using the LSQM1WCMB0 as the FTP client
You can also maintain the file system of the LSQM1WCMB0 through FTP with the access controller
module as the FTP client by following the steps below.
1) Set up a maintenance environment.
Create user account guest
Set user type to FTP
Set password 123456 for user guest
The system prompt changed to ftp>
IP address of the LSQM1WCMB0
Username configured on the LSQM1WCMB0
Enter the password 123456
Set the transfer mode to binary
Change the local path
Backup to PC
Restore file to LSQM1WCMB0
Quit FTP
5-19