Interface Attributes; Figure 7-4 2Fe Module; Figure 7-5 4Fe Module; Table 7-1 Interface Attributes Of The 1Fe, 2Fe And 4Fe Modules - H3C SECPATH F100-A,SECPATH F100-A HOST,A Installation Manual

Installation Manual
H3C SecPath F100-A Firewall

Figure 7-4 2FE module

III. Appearance of the 4FE module
Figure 7-5 shows the 4FE module.

Figure 7-5 4FE module

7.4.3 Interface Attributes

Table 7-1 shows the interface attributes of the 1FE, 2FE and 4FE modules.

Table 7-1 Interface attributes of the 1FE, 2FE and 4FE modules

Attribute
Connector
Number of
connectors
Cable type
Operating mode
Frame format
1FE module
RJ-45
1 2
Straight-through Ethernet cable
Full/half duplex
10/100 Mbps autosensing
Ethernet_II
Ethernet_SNAP
7-4
Chapter 7 MIM Modules
2FE module 4FE module
4