Table of Contents
Advertisement
Installation Manual
H3C SecPath F100-A Firewall
Chapter 5 Software Maintenance
The firewall manages three types of files:
Boot ROM program files
Application program files
Configuration files
Software maintenance mainly involves upgrading/downloading Boot ROM/application
program files and uploading/downloading configuration files.
5.1 Boot Menu
This section introduces the Boot menu that you use in maintaining the software of the
firewall.
Set up a configuration environment (see Figure 4-1) and then boot the firewall. Press
<Ctrl+B> when the system prompts "Press Ctrl-B to enter Boot menu". Then the system
displays:
Please
Caution:
Press <Ctrl+B> within three seconds to access the Boot menu after the prompt
"Press Ctrl-B to Enter Boot menu..." appears. Otherwise, the system starts
decompressing the program.
If you want to access the Boot menu after the system starts decompressing the
program, you need to reboot the firewall.
Type the correct password and press <Enter> (If no Boot ROM password has been set,
just press <Enter>). The system accesses the Boot menu shown as follows:
I. Boot menu on the H3C SecPath F100-A firewall
Boot Menu:
1:
2:
3:
4:
5:
6:
input Boot ROM password :
Download application program with XMODEM
Download application program with NET
Display file in flash
Delete file from flash
Start up and ignore configuration
Enter debugging environment
Chapter 5 Software Maintenance
5-1
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the H3C SECPATH F100-A,SECPATH F100-A HOST,A and is the answer not in the manual?
Questions and answers