Figure 4-2 Create A New Connection; Figure 4-3 Select Connection Port - H3C SECPATH F100-A,SECPATH F100-A HOST,A Installation Manual

Installation Manual
H3C SecPath F100-A Firewall

Figure 4-2 Create a new connection

Step 2: Define terminal parameters (using the HyperTerminal on Windows98 as an
example).
1) Select connection port
Select the serial interface to be used from the Connect Using drop-down list. The serial
interface selected here must be the one connected to the console cable.

Figure 4-3 Select connection port

2) Set the connection port
The [Settings] tab appears as shown in Figure 4-4, and set the serial interface
parameters as follows:
Bits per second = 9600
Chapter 4 Firewall Configuration
4-2