Mounting The Firewall; Free-Standing; Rack-Mounting; Table 3-1 Physical Dimensions Of The H3C Secpath F100-A Firewall - H3C SECPATH F100-A,SECPATH F100-A HOST,A Installation Manual

Installation Manual
H3C SecPath F100-A Firewall
Caution:
Before you install the H3C SecPath F100-A firewall, make sure:
You have read Chapter 2 carefully.
The requirements listed in Chapter 2 are matched.

3.2 Mounting the Firewall

You can place the H3C SecPath F100-A firewall on a workbench/tabletop or mount it in
a 19-inch standard rack.

3.2.1 Free-Standing

Place the firewall on a clean and flat workbench/tabletop. To prevent any damage,
observe the following:
Ensure the workbench/table is stable enough.
Allow 10 cm (3.9 in.) of clearance around the ventilation openings.
Do not place heavy stuff on the firewall.

3.2.2 Rack-Mounting

The H3C SecPath F100-A firewall is designed to be mounted in 19-inch standard racks.
Table 3-1 shows its physical dimensions.

Table 3-1 Physical dimensions of the H3C SecPath F100-A firewall

H3C SecPath F100-A firewall
Follow these steps to rack-mount the H3C SecPath F100-A firewall:
Step 1: Check the grounding and stability of the rack. Use the screws to fix the
mounting ears at both sides near the front panel of the device.
Step 2: Put the device in a rack tray. Depending on the actual situation, slide the device
along the guide rails to an appropriate place.
Step 3: Fix the mounting ears to the rack posts with suitable antirust pan-head screws.
Make sure that the device is placed horizontally and securely fixed.
Model
3-2
Chapter 3 Firewall Installation
Physical dimensions (H × W × D)
44 × 436 × 330 mm (1.7 × 17.2 × 13.0
in.) (excluding feet)