Cisco 7971G-GE - IP Phone VoIP Administration Manual page 115

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Single Button Barge
Speed dialing
Time-of-Day Routing
Touchscreen
illumination disabling
Transfer-direct transfer
OL-15299-01
Description
Allows users to press a line key to Barge or cBarge
into a remote-in-use call on a shared line.
Dials a specified number that has been previously
stored.
Restricts access to specified telephony features by
time period.
Allows user to disable touchscreen illumination on
a phone, which would override other rules that
determine when the touchscreen gets illuminated.
To provide this feature, you must implement the
Display URI, which includes configuring the
length of time that illumination remains disabled.
Transfer—The first invocation of Transfer will
always initiate a new call by using the same
directory number, after putting the active call on
hold.
Direct Transfer—This transfer joins two
established calls (call is in hold or in connected
state) into one call and drops the feature initiator
from the call. Direct Transfer does not initiate a
consultation call and does not put the active call on
hold.
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
Telephony Features Available for the Phone
Configuration Reference
For more information, refer to:
Cisco Unified Communications Manager
•
Administration Guide, "Device Pool
Configuration" chapter.
Cisco Unified Communications Manager
•
System Guide, "Cisco Unified IP Phones"
chapter.
Cisco Unified Communications Manager
•
Features and Services Guide, "Barge and
Privacy" chapter.
For more information refer to:
Cisco Unified Communications Manager
•
Administration Guide, "Cisco Unified IP
Phone Configuration" chapter.
Cisco Unified Communications Manager
•
System Guide, "Cisco Unified IP Phones"
chapter.
For more information refer to:
Cisco Unified Communications Manager
•
Administration Guide, "Time Period
Configuration" chapter.
Cisco Unified Communications Manager
•
System Guide, "Time-of-Day Routing"
chapter.
Refer to the Cisco Unified IP Phone Service
Application Development Notes at the following
location:
http://www.cisco.com/en/US/products/sw/voi
cesw/ps556/products_programming_referenc
e_guides_list.html
For more information, refer to the Cisco
Unified Communications Manager
Administration Guide, "Understanding
Directory Numbers" chapter.
5-15