Cisco 7971G-GE - IP Phone VoIP Administration Manual page 84

Device Configuration Menu
Table 4-12 UI Configuration Menu Options (continued)
Option
Reverting Focus Priority Indicates whether the phone shifts the call focus
Auto Call Select
"more" Softkey Timer
Wideband Headset UI
Control
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
4-18
Description
on the phone screen to an incoming call or a
reverting hold call. Settings include:
Lower—Focus priority given to incoming calls.
Higher—Focus priority given to reverting calls.
Even—Focus priority given to the first call.
Indicates whether the phone automatically shifts
the call focus to an incoming call on the same
line when the user is already on a call.
When this option is enabled, the phone shifts the
call focus to the most recent incoming call.
When this option is disabled, all automatic focus
changes, including Auto Line Select, are
disabled regardless of their setting.
Default: Enabled
Indicates the number of seconds that additional
softkeys are displayed after the user presses
more. If this timer expires before the user
presses another softkey, the display reverts to the
initial softkeys.
Range: 5 to 30; 0 represents an infinite timer.
Default: 5
Indicates whether the user can configure the
Wideband Headset option in the phone user
interface.
Values:
Enabled—The user can configure the
•
Wideband Headset option in the Audio
Preferences menu on the phone (choose
> User Preferences > Audio
Preferences> Wideband Headset).
Disabled—The value of the Wideband
•
Headset option in Cisco Unified
Communications Manager Administration
gets used (see Media Configuration Menu,
page 4-19
Default: Enabled
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
From Cisco Unified Communications Manager
Administration, choose System > Device Pool.
See also: Hold Reversion.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
Use Cisco Unified Communications Manager
Administration > Device > Phone > Phone
Configuration.
OL-15299-01