Cisco 7971G-GE - IP Phone VoIP Administration Manual page 73

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-2 Network Configuration Menu Options (continued)
Option Description
SW Port Speed and duplex of the network port (labeled 10/100
Configuration SW on the Cisco Unified IP Phone 7970, and
10/100/1000 SW on the Cisco
Unified IP Phone 7971G-GE). Valid values:
•
•
•
•
•
•
If the phone is connected to a switch, configure the
port on the switch to the same speed/duplex as the
phone, or configure both to auto-negotiate.
If you change the setting of this option, you must
change the PC Port Configuration option to the same
setting.
PC Port Speed and duplex of the access port (labeled 10/100
Configuration PC on the Cisco Unified IP Phone 7970, and
10/100/1000 PC on the Cisco
Unified IP Phone 7971G-GE). Valid values:
•
•
•
•
•
•
If the phone is connected to a switch, configure the
port on the switch to the same speed/duplex as the
phone, or configure both to auto-negotiate.
If you change the setting of this option, you must
change the SW Port Configuration option to the same
setting.
PC VLAN Allows the phone to interoperate with 3rd party
switches that do not support a voice VLAN. The
Admin VLAN ID option must be set before you can
change this option.
OL-15299-01
Auto Negotiate
10 Half—10-BaseT/half duplex
10 Full—10-BaseT/full duplex
100 Half—100-BaseT/half duplex
100 Full—100-BaseT/full duplex
1000 Full—1000-BaseT/full duplex
Auto Negotiate
10 Half—10-BaseT/half duplex
10 Full—10-BaseT/full duplex
100 Half—100-BaseT/half duplex
100 Full—100-BaseT/full duplex
1000 Full—1000-BaseT/full duplex
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
Network Configuration Menu
To Change
Unlock network configuration options.
1.
Scroll to the SW Port Configuration
2.
option and then press the Edit softkey.
Scroll to the setting that you want and then
3.
press the Select softkey.
Press the Save softkey.
4.
1. Unlock network configuration options.
2. Scroll to the PC Port Configuration option
and then press the Edit softkey.
3. Scroll to the setting that you want and then
press the Select softkey.
Press the Save softkey.
4.
Unlock network configuration options.
1.
Make sure the Admin VLAN ID option is
2.
set.
Scroll to the PC VLAN option, press the
3.
Edit softkey, and then enter a new PC
VLAN setting.
Press the Validate softkey and then press
4.
the Save softkey.
4-7