Performing Final End User Configuration Steps - Cisco 7971G-GE - IP Phone VoIP Administration Manual

Appendix E Basic Phone Administration Steps

Performing Final End User Configuration Steps

If you are not already on the End User Configuration page, choose User Management > End User to
perform some final configuration tasks. Use the Search fields and the Find button to locate the user (i.e.
John Doe), then click on the user ID to get to the End User Configuration window for the user.
In the End User configuration window, do the following:
Procedure
Step 1 In the Directory Number Associations pane of the screen, set the primary extension from the drop-down
list.
Step 2 In the Mobility Information pane, check the Enable Mobility box.
Step 3 In the Permissions Information pane, use the User Group buttons to add this user to any user groups. For
example, you may want to add the user to a group that has been defined as a "Standard CCM End User
Group."
To view all configured user groups, choose User Management > User Group.
Click Save.
Step 4
OL-15299-01
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
Performing Final End User Configuration Steps
E-7