Line Settings Menu (Sip Phones Only); Call Preferences Menu (Sip Phones Only) - Cisco 7971G-GE - IP Phone VoIP Administration Manual

Device Configuration Menu

Line Settings Menu (SIP Phones Only)

The Line Settings menu displays information that relates to the configurable parameters for each of the
lines on a SIP phone.
Table 4-7 Line Settings Menu Options
Option
Name
Short Name
Authentication Name
Display Name
Proxy Address
Proxy Port
Shared Line
Related Topics
•
•

Call Preferences Menu (SIP Phones Only)

The Call Preferences menu displays settings that relate to the settings for the call preferences on a SIP
phone.
Table 4-8 Call Preferences Menu Options
Option
Caller ID Blocking
Anonymous Call Block
Call Waiting
Preferences
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
4-14
Table 4-7
Description
Displays the lines and the number used to
register each line.
Displays the short name configured for the line. Use Cisco Unified Communications Manager
Displays the name used by the phone for
authentication if a registration is challenged by
the call control server during initialization.
Displays the identification the phone uses for
display for caller identification purposes.
The value is left blank because it is not
applicable to SIP phones that are using Cisco
Unified Communications Manager.
The value is left blank because it is not
applicable to SIP phones that are using Cisco
Unified Communications Manager.
Displays if the line is part of a shared line (Yes)
or not (No).
Displaying a Configuration Menu, page 4-2
Device Configuration Menu, page 4-10
Table 4-8 describes the options in this menu.
Description
Indicates whether caller ID blocking is enabled
(Yes) or disabled (No) for the phone.
Indicates whether anonymous call block is
enabled (Yes) or disabled (No) for the phone.
Displays a sub-menu that indicates whether call
waiting is enabled (Yes) or disabled (No) for
each line.
Chapter 4
describes the options in this menu.
To Change
Use Cisco Unified Communications Manager
Administration to modify.
Administration to modify.
Use Cisco Unified Communications Manager
Administration to modify.
Use Cisco Unified Communications Manager
Administration to modify.
Display only—Cannot configure.
Display only—Cannot configure.
Display only—Cannot configure.
To Change
From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
From Cisco Unified Communications Manager
Administration, choose Call Routing >
Directory Number.
Configuring Settings on the Cisco Unified IP Phone
OL-15299-01