Cisco 7971G-GE - IP Phone VoIP Administration Manual page 155

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Table 8-2
Item
Headset enabled
User Locale Version
Network Locale Version
PC Port Disabled
Speaker Enabled
GARP Enabled
Video Capability Enabled
Voice VLAN Enabled
Auto Line Select
DSCP for Call Control
DSCP for Configuration
DSCP for Services
Security Mode
Web Access Enabled
Span to PC Port
PC VLAN
CDP: PC Port
CDP: SW Port
LLDP-MED: SW Port
LLDP: PC Port
LLDP Power Priority
LLDP Asset ID
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
OL-15299-01
Network Configuration Area Items (continued)
Description
Indicates whether the Headset button is enabled on the phone.
Version of the user locale loaded on the phone.
Version of the network locale loaded on the phone.
Indicates whether the PC port on the phone is enabled or disabled.
Indicates whether the speakerphone is enabled on the phone.
Indicates whether the phone learns MAC addresses from Gratuitous
ARP responses.
Indicates whether the phone can participate in video calls when
connected to an appropriately equipped PC.
Indicates whether the phone allows a device attached to the PC port to
access the Voice VLAN.
Indicates whether the phone shifts the call focus to incoming calls on
all lines.
DSCP IP classification for call control signaling.
DSCP IP classification for any phone configuration transfer.
DSCP IP classification for phone-based services.
Displays the security mode that is set for the phone.
Indicates whether web access is enabled (Yes) or disabled (No) for the
phone.
Indicates whether the phone will forward packets transmitted and
received on the network port to the access port.
VLAN used to identify and remove 802.1P/Q tags from packets sent to
the PC.
Indicates whether CDP is supported on the PC port.
Indicates whether CDP is supported on the switch xport.
Indicates whether Link Layer Discovery Protocol Media Endpoint
Discovery (LLDP-MED) is enabled on the switch port.
Indicates whether Link Layer Discovery Protocol (LLDP) is enabled
on the PC port.
Advertises the phone's power priority to the switch, enabling the
switch to appropriately provide power to the phones. Settings include:
Unknown—default
•
Low
•
High
•
Critical
•
Identifies the asset ID assigned to the phone for inventory
management.
Network Configuration
8-7