Cisco 7971G-GE - IP Phone VoIP Administration Manual page 72

Network Configuration Menu
For information about the keys you can use to edit options, see the
Table 4-2 Network Configuration Menu Options
Option Description
IPv4 Configuration In the IPv4 Configuration menu, you can do the
following:
•
•
For more information on the IPv4 address fields, refer
to Table
IPv6 Configuration This menu setting is disabled in this release.
MAC Address Unique Media Access Control (MAC) address of the
phone.
Host Name Unique host name that the DHCP server assigned to
the phone.
Domain Name Name of the Domain Name System (DNS) domain in
which the phone resides.
Operational VLAN Auxiliary Virtual Local Area Network (VLAN)
ID configured on a Cisco Catalyst switch in which the
phone is a member.
If the phone has not received an auxiliary VLAN, this
option indicates the Administrative VLAN.
If neither the auxiliary VLAN nor the Administrative
VLAN are configured, this option is blank.
Admin. VLAN ID Auxiliary VLAN in which the phone is a member.
Used only if the phone does not receive an auxiliary
VLAN from the switch; otherwise it is ignored.
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
4-6
Enable or disable the phone to use the IP address
that is assigned by the DHCP server.
Manually set the IP Address, Subnet Mask,
Default Routers, DNS Server, and Alternate TFTP
servers.
4-3.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
"Editing Values" section on page
To Change
1. Unlock network configuration options.
2. Scroll to IPv4 Configuration and press the
Select softkey.
Display only—Cannot configure.
Display only—Cannot configure.
1. Unlock network configuration options.
2. Set the DHCP Enabled option to No.
3. Scroll to the Domain Name option, press
the Edit softkey, and then enter a new
domain name.
Press the Validate softkey and then press
4.
the Save softkey.
The phone obtains its Operational VLAN ID
via Cisco Discovery Protocol (CDP) from the
switch to which the phone is attached. To
assign a VLAN ID manually, use the Admin
VLAN ID option.
Unlock network configuration options.
1.
Scroll to the Admin. VLAN ID option,
2.
press the Edit softkey, and then enter a
new Admin VLAN setting.
Press the Validate softkey and then press
3.
the Save softkey.
4-3.
OL-15299-01