Symptom: Cisco Unified Ip Phone Unable To Obtain Ip Address; Cisco Unified Ip Phone Resets Unexpectedly; Verifying Physical Connection; Identifying Intermittent Network Outages - Cisco 7971G-GE - IP Phone VoIP Administration Manual

Cisco Unified IP Phone Resets Unexpectedly

If the phone is already in the Cisco Unified Communications Manager database, its configuration file
may be damaged. See the

Symptom: Cisco Unified IP Phone Unable to Obtain IP Address

If a phone is unable to obtain an IP address when it starts up, the phone may be not be on the same
network or VLAN as the DHCP server, or the switch port to which the phone is connected may be
disabled.
Make sure that the network or VLAN to which the phone is connected has access to the DHCP server,
and make sure that the switch port is enabled.
Cisco Unified IP Phone Resets Unexpectedly
If users report that their phones are resetting during calls or while idle on their desk, you should
investigate the cause. If the network connection and Cisco Unified Communications Manager
connection are stable, a Cisco Unified IP Phone should not reset on its own.
Typically, a phone resets if it has problems connecting to the Ethernet network or to
Cisco Unified Communications Manager. These sections can help you identify the cause of a phone
resetting in your network:
•
•
•
•
•
•
•
•

Verifying Physical Connection

Verify that the Ethernet connection to which the Cisco Unified IP Phone is connected is up. For example,
check whether the particular port or switch to which the phone is connected is down and that the switch
is not rebooting. Also make sure that there are no cable breaks.

Identifying Intermittent Network Outages

Intermittent network outages affect data and voice traffic differently. Your network might have been
experiencing intermittent outages without detection. If so, data traffic can resend lost packets and verify
that packets are received and transmitted. However, voice traffic cannot recapture lost packets. Rather
than retransmitting a lost network connection, the phone resets and attempts to reconnect its network
connection.
If you are experiencing problems with the voice network, you should investigate whether an existing
problem is simply being exposed.
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
9-6
"Creating a New Configuration File" section on page 9-5
Verifying Physical Connection, page 9-6
Identifying Intermittent Network Outages, page 9-6
Verifying DHCP Settings, page 9-7
Checking Static IP Address Settings, page 9-7
Verifying Voice VLAN Configuration, page 9-7
Verifying that the Phones Have Not Been Intentionally Reset, page 9-7
Eliminating DNS or Other Connectivity Errors, page 9-7
Checking Power Connection, page 9-8
Chapter 9 Troubleshooting and Maintenance
for assistance.
OL-15299-01