Line Settings Menu (Sip Phones Only); Call Preferences Menu (Sip Phones Only) - Cisco CP-7942G Software Manual

Device Configuration Menu

Line Settings Menu (SIP Phones Only)

The Line Settings menu displays information that relates to the configurable parameters for the lines on
your SIP phone.
Table 4-8 Line Settings Menu Options
Option
Name
Short Name
Authentication Name
Display Name
Proxy Address
Proxy Port
Shared Line
Related Topics
•
•

Call Preferences Menu (SIP Phones Only)

The Call Preferences menu displays settings that relate to the settings for the call preferences on the SIP
phone.
Table 4-9 Call Preferences Menu Options
Option
Caller ID Blocking
Anonymous Call Block
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
4-14
Table 4-8 describes the options in this menu.
Description
Displays the lines and the number used to register each
line.
Displays the short name configured for the line.
Displays the name used by the phone for authentication
if a registration is challenged by the call control server
during initialization.
Displays the identification the phone uses for display
for caller identification purposes.
Displays the IP address of the proxy server that will be
used by the phone. The value is left blank because it is
not applicable to SIP phones that are using Cisco
Unified Communications Manager.
The value is left blank because it is not applicable to
SIP phones that are using Cisco Unified
Communications Manager.
Displays if the line is part of a shared line (Yes) or not
(No).
Displaying a Configuration Menu, page 4-2
Device Configuration Menu, page 4-11
Table 4-9 describes the options in this menu.
Description
Indicates whether caller ID blocking is enabled
(Yes) or disabled (No) for the phone.
Indicates whether anonymous call block is enabled
(Yes) or disabled (No) for the phone.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
Use Cisco Unified Communications
Manager Administration to modify.
Use Cisco Unified Communications
Manager Administration to modify.
Use Cisco Unified Communications
Manager Administration to modify.
Use Cisco Unified Communications
Manager Administration to modify.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
To Change
From Cisco Unified Communications
Manager Administration, choose Device >
Device Settings > SIP Profile.
From Cisco Unified Communications
Manager Administration, choose Device >
Device Settings > SIP Profile.
OL-15483-01