Adding Conference Stations With Cisco Unified Communications Manager Administration; Adding Conference Stations With Bat; Determining The Mac Address Of A Conference Station - Cisco 7937G - Unified IP Conference Station VoIP Phone Administration Manual

Chapter 2 Preparing to Install the Conference Station on Your Network
Adding Conference Stations with Cisco Unified Communications Manager
Administration
You can add conference stations individually to the Cisco Unified Communications Manager database
using Cisco Unified Communications Manager Administration. To do so, you first need to obtain the
MAC address for each conference station.
For information about determining a MAC address, see the
Conference Station" section on page
After you collect MAC addresses, in Cisco Unified Communications Manager Administration, choose
Device > Phone, and then click Add New to begin.
For complete instructions and conceptual information about Cisco Unified Communications Manager,
refer to Cisco Unified Communications Manager Administration Guide and to Cisco Unified
Communications Manager System Guide.
Related Topics
•
•
•

Adding Conference Stations with BAT

The Cisco BAT enables you to perform batch operations, including registration, on multiple
conference stations.
Before you can add conference stations using BAT only (not in conjunction with TAPS), you must obtain
the MAC address for each conference station.
For information about determining a MAC address, see the
Conference Station" section on page
For detailed instructions about using BAT, refer to Cisco Unified Communications Manager
Administration Guide and to Cisco Unified Communications Manager Bulk Administration Guide.
Related Topics
•
•
•

Determining the MAC Address of a Conference Station

You can determine the MAC address for a conference station in any of these ways:
•
•
•
OL-11560-01 Rev. B0
Adding Conference Stations with Auto-Registration, page 2-7
Adding Conference Stations with Auto-Registration and TAPS, page 2-8
Adding Conference Stations with BAT, page 2-9
Adding Conference Stations with Auto-Registration, page 2-7
Adding Conference Stations with Auto-Registration and TAPS, page 2-8

Adding Conference Stations with Cisco Unified Communications Manager Administration,

page 2-9
From the conference station, choose Applications > Settings > Model Information and look at the
MAC Address field.
Look at the MAC label on the back of the conference station.
Display the conference station web page, and click the Device Information hyperlink.
For information about accessing the conference station web page, see the
for a Conference Station" section on page
Cisco Unified IP Conference Station 7937 Administration Guide for Cisco Unified Communications Manager 6.0
Determining the MAC Address of a Conference Station
"Determining the MAC Address of a
2-9.
"Determining the MAC Address of a
2-9.
8-2.
"Accessing the Web Page
2-9