Cisco 7937G - Unified IP Conference Station VoIP Phone Administration Manual page 53

Chapter 4 Configuring Settings on the Conference Station
Table 4-3 Network Configuration Menu Options (continued)
Option Description
Operational Auxiliary Virtual Local Area
VLAN ID Network (VLAN) configured on a
Cisco Catalyst switch in which the
conference station is a member.
If the conference station has not
received an auxiliary VLAN, this
option indicates the Admin.
VLAN.
If neither the auxiliary VLAN nor
the Administrative VLAN are
configured, this option is blank.
Admin. VLAN Auxiliary VLAN in which the
ID conference station is a member.
Used only if the conference station
does not receive an auxiliary
VLAN from the switch.
TFTP Server 1 Primary Trivial File Transfer
Protocol (TFTP) server used by the
conference station. If you are not
using DHCP in your network and
you want to change this server, you
must use the TFTP Server 1 option.
If you set the Alternate TFTP
option to yes, you must enter a
non-zero value for the TFTP Server
1 option.
TFTP Server 2 Optional backup TFTP server that
the conference station uses if the
primary TFTP server is
unavailable.
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
OL-11560-01 Rev. B0
To Change
The conference station obtains its Operational VLAN ID via
Cisco Discovery Protocol (CDP) from the switch to which the
conference station is attached. To assign a VLAN ID manually, use
the Admin VLAN ID option.
Unlock network configuration options. For more information,
1.
see the "Unlocking and Locking Options" section on page
Choose Applications > Settings > Network Configuration >
2.
Admin. VLAN ID.
3. Enter a new Admin. VLAN ID.
Press Validate, and then press Save.
4.
If DHCP is enabled, set the Alternate TFTP option to Yes. For
1.
more information, see the Alternate TFTP option in this table.
Choose Applications > Settings > Network Configuration >
2.
TFTP Server 1.
Enter a new TFTP server IP address.
3.
Press Validate, and then press Save.
4.
Unlock network configuration options. For more information,
1.
see the "Unlocking and Locking Options" section on page
Enter an IP address for the TFTP Server 1 option. For more
2.
information, see the TFTP Server 1 option in this table.
3. Choose Applications > Settings > Network Configuration.
Choose the TFTP Server 2 option, and then press Select.
4.
Enter a new backup TFTP server IP address.
5.
Press Validate, and then press Save.
6.
Network Configuration Menu
4-3.
4-3.
4-7