Unlocking And Locking Options; Editing Values - Cisco 7937G - Unified IP Conference Station VoIP Phone Administration Manual

Chapter 4 Configuring Settings on the Conference Station

Unlocking and Locking Options

Configuration options that you can change from a conference station are locked by default to prevent
users from making changes that could affect the operation of a conference station. You must unlock these
options before you can change them.
When options are inaccessible for modification, a locked padlock icon
menus. When options are unlocked and accessible for modification, an unlocked padlock icon
appears on these menus.
To unlock or lock options, press **#. This action either locks or unlocks the options, depending on the
previous state.
Make sure to lock options after you have made your changes.
Do not press **# to unlock options and then immediately press **# again to lock options. The
Caution
conference station will interpret this sequence as **#**, which will reset the conference station. To lock
options after unlocking them, wait at least 10 seconds before you press **# again.
Related Topics
•
•
•
•
•
•

Editing Values

When you edit the value of an option setting, follow these guidelines:
•
•
•
•
•
Note The conference station provides several methods to reset or restore option settings, if necessary. For
more information, see the
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
OL-11560-01 Rev. B0
Displaying a Configuration Menu, page 4-2
Editing Values, page 4-3
Overview of Options Configurable from a Conference Station, page 4-4
Network Configuration Menu, page 4-5
Device Configuration Menu, page 4-8
Security Configuration Menu, page 4-12
Use the keys on the keypad to enter numbers and letters.
To enter letters using the keypad, use a corresponding number key. Press the key one or more times
to display a particular letter. For example, press the 2 key once for "a," twice quickly for "b," and
three times quickly for "c." After you pause, the cursor automatically advances to allow entry of the
next letter.
To enter a period (for example, in an IP address), press the . (period) softkey or press * on the
keypad.
Press << if you make a mistake. This softkey deletes the character to the left of the cursor.
Press Cancel before pressing Save to discard any changes that you have made.
"Resetting or Restoring the Conference Station" section on page
Configuration Menus on the Conference Station
appears on the configuration
9-11.
4-3