Verifying The Conference Station Startup Process - Cisco 7937G - Unified IP Conference Station VoIP Phone Administration Manual

Verifying the Conference Station Startup Process

Figure 3-5
Figure 3-5

Verifying the Conference Station Startup Process

After the conference station has power connected to it, the conference station begins its startup process
by cycling through these steps:
1.
2.
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
3-8
shows how to connect a cable lock to the conference station.
Connecting a Cable Lock to the Conference Station
Ready, Call State Off: The LCD screen lights up and LED indicators on top of the console glow a
solid amber for 20 seconds.
Powering On: The LCD screen dims and the LED indicators turn a solid red and glow for an
additional five seconds.
Chapter 3 Setting Up the Conference Station
OL-11560-01 Rev. B0