Displaying A Configuration Menu - Cisco 7937G - Unified IP Conference Station VoIP Phone Administration Manual

Configuration Menus on the Conference Station
Related Topics
•
•
•
•
•
•

Displaying a Configuration Menu

To display a configuration menu, perform the following steps:
You can control whether a conference station has access to the Settings menu or to options on this menu
Note
by using the Settings Access field in the Cisco Unified Communications Manager Administration Phone
Configuration page. The Settings Access field accepts these values:
•
•
•
If you cannot access an option on the Settings menu, check the Settings Access field. For more
information, refer to the Cisco Unified Communications Manager Administration Guide.
Procedure
Choose Applications > Settings.
Step 1
Perform one of these actions to select an item in the Settings menu:
Step 2
•
•
Step 3 To exit a menu, press the Exit softkey.
Related Topics
•
•
•
•
•
•
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
4-2
Unlocking and Locking Options, page 4-3
Editing Values, page 4-3
Overview of Options Configurable from a Conference Station, page 4-4
Network Configuration Menu, page 4-5
Device Configuration Menu, page 4-8
Security Configuration Menu, page 4-12
Enabled—Allows access to the Settings menu.
Disabled—Prevents access to the Settings menu.
Restricted—Allows access to the User Preferences menu, but prevents access to other options on
the Settings menu.
Use the Navigation button to select the desired item, and then press Select.
Use the keypad on the conference station to enter the number that corresponds to the item.
Unlocking and Locking Options, page 4-3
Editing Values, page 4-3
Overview of Options Configurable from a Conference Station, page 4-4
Network Configuration Menu, page 4-5
Device Configuration Menu, page 4-8
Security Configuration Menu, page 4-12
Chapter 4 Configuring Settings on the Conference Station
OL-11560-01 Rev. B0