Configuring Usb Settings - Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual

For cisco unified communications manager 7.0(1)
Hide thumbs Also See for 7925G - Unified Wireless IP Phone VoIP:
Table of Contents

Advertisement

Configuring USB Settings

Related Topics
Configuring USB Settings
To use the USB cable from your PC to a phone, you must configure the USB settings to work with the
USB port on the PC. The phone has a default USB IP address of 192.168.1.100. You can change the USB
port configuration on the phone in these ways:
To display the USB Settings area, access the web page for the phone as described in the
Phone Web Page" section on page
To change the USB port settings for the phone, follow these steps:
Procedure
On the phone web page, choose the USB Settings hyperlink.
Step 1
Choose one of the following options:
Step 2
Step 3
To change the static IP address, in the IP Address field, enter a new IP address that is not assigned on
the subnet.
Step 4
To change the subnet for the new IP address, in the Subnet Mask field, enter the appropriate subnet
address.
Click Save to make the change.
Step 5
Related Topics
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
4-26
Accessing the Configuration Web Page for a Phone, page 4-5
Network Profile Settings, page 4-8
Configuring Wireless Settings in a Network Profile, page 4-12
Configuring Wireless LAN Security, page 4-13
Setting the Wireless Security Credentials, page 4-15
Configuring the Pre-shared Key, page 4-15
Configuring IP Network Settings, page 4-23
Configuring the Alternate TFTP Server, page 4-24
To obtain the IP address automatically, by getting an IP address from the PC that has DHCP set up.
To use the IP address and subnet mask assigned in this area.
Obtain IP address automatically
Use the following IP address
Accessing the Phone Web Page, page 4-3
Configuring Network Profiles, page 4-8
Configuring Trace Settings, page 4-27
Using System Settings, page 4-34
Chapter 4
Using the Cisco Unified Wireless IP Phone 7925G Web Pages
4-3, and then click the USB Settings hyperlink.
"Accessing the
OL-15984-01

Advertisement

Table of Contents
loading

Table of Contents