Chapter 3
Setting Up the Cisco Unified Wireless IP Phone 7925G
Do not charge the battery pack if the ambient temperature exceeds 104 degrees Fahrenheit (40 degrees
Caution
Celsius).
Do not expose the battery pack to high storage temperatures (above 140 degrees Fahrenheit, 60 degrees
Caution
Celsius).
Caution
When discarding a battery pack, contact your local waste disposal provider regarding local restrictions
on the disposal or recycling of batteries.
To obtain a replacement battery, contact your local dealer. Use only the batteries that have the following
Cisco part numbers.
Standard battery—CP-BATT-7925G-STD
Extended battery—CP-BATT-7925G-EXT
Use only the Cisco power supply. If you must replace your power supply, refer to the list of Cisco part
Caution
numbers.
Australia—CP-PWR-7925G-AU
Central Europe
China—CP-PWR-7925G-CN
Japan—CP-PWR-7925G-JP
North America
United Kingdom
Related Topics
•
•
Installing the Cisco Unified Wireless IP Phone 7925G
After setting up the wireless network to support voice communications and configuring the
wireless IP phones in Cisco Unified Communications Manager, you are ready to install the phones. This
section includes the following installation information:
•
•
•
Providing Power to the Phone
The Cisco Unified Wireless IP Phone 7925G uses a battery for power.
batteries available for the wireless IP phone and the maximum talk and standby times.
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
CP-PWR-7925G-CE
—
CP-PWR-7925G-NA
—
CP-PWR-7925G-UK
—
Network Requirements, page 3-1
Providing Power to the Phone, page 3-7
Providing Power to the Phone, page 3-7
Configuring Wireless LAN Settings for the Cisco Unified Wireless IP Phone 7925G, page 3-13
Using a Headset, page 3-13
Installing the Cisco Unified Wireless IP Phone 7925G
Table 3-3
lists the types of
3-7