Setting The Wireless Security Credentials; Configuring The Username And Password; Configuring The Pre-Shared Key - Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual

For cisco unified communications manager 7.0(1)
Hide thumbs Also See for 7925G - Unified Wireless IP Phone VoIP:
Table of Contents

Advertisement

Chapter 4
Using the Cisco Unified Wireless IP Phone 7925G Web Pages

Setting the Wireless Security Credentials

When your network uses EAP-FAST, LEAP, EAP-TLS, PEAP, or Auto (AKM) with WPA, WPA2,
CCKM for user authentication, you must configure both the username and a password on the Access
Control Server (ACS) and the phone.
Note
If you use domains within your network, you must enter the username with the domain name, in this
format: domain\username.
For information about setting security credentials, see these topics:

Configuring the Username and Password

To enter or change the username or password for the network profile, you must use the same username
and the same password string that is configured in the RADIUS server. The maximum length of the
username or password entry is 32 characters.
To set up the username and password in Wireless Security Credentials, follow these steps:
Procedure
Choose the network profile.
Step 1
Step 2
In the Username field, enter the network username for this profile.
In the Password field, enter the network password string for this profile.
Step 3
Step 4
Click Save to make the change.

Configuring the Pre-shared Key

When using Auto (AKM) with WPA Pre-shared key or WPA2 with Pre-shared key for authentication,
you must configure a Passphrase/Pre-shared key in the Wireless Security Credentials area.
Pre-shared Key Formats
The Cisco Unified Wireless IP Phone 7925G supports ASCII and hexadecimal formats. You must use
one of these formats when setting up a WPA Pre-shared key:
Hexadecimal
For hexadecimal keys, you must enter 64 hex digits (0-9 and/or A-F); for example,
AB123456789CD01234567890EFAB123456789CD01234567890EF3456789C
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Configuring the Username and Password, page 4-15
Configuring the Pre-shared Key, page 4-15
Setting Wireless Encryption, page 4-16
Installing Authentication Certificates for EAP-TLS Authentication, page 4-17
Configuring PEAP, page 4-22
Configuring Network Profiles
4-15

Advertisement

Table of Contents
loading

Table of Contents