Using The Power Supply To Charge The Phone Battery - Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual

Chapter 3 Setting Up the Cisco Unified Wireless IP Phone 7925G

Using the Power Supply to Charge the Phone Battery

To charge the phone battery quickly, follow the steps in
Figure 3-4
6
1
2
3
4
5
6
You can use the phone while the battery is being charged. For charging times, see
Note
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Charging the Phone Battery
1
2
3
Lift the mini-USB port cover on the bottom of phone.
Swing the port cover to one side.
Insert the AC power supply mini-USB connector in the port.
Insert the AC plug adapter in the slot on the power supply.
Insert the AC power supply in a wall outlet.
Indicator light—Indicates the charging status:
Red—Battery charging in process.
•
Green—Battery charging is complete.
•
Installing the Cisco Unified Wireless IP Phone 7925G
Figure 3-4.
5
4
Table 3-4.
3-11