Ending A Call - Cisco 7911G - IP Phone VoIP Phone Manual

If you want to...
Answer a priority call
(SCCP phones only)
Answer a call on your
mobile phone or other
remote destination
Tip
If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system
administrator for more information.

Ending a Call

To end a call, simply hang up. Here are some more details.
If you want to...
Hang up while using the handset
Hang up while monitoring a call (using
the speaker)
Hang up one call, but preserve another
call on the same line
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 7.0
Then...
Hang up the current call and press
Answer.
Set up Mobile Connect and answer
your phone.
When you enable Mobile Connect:
• Your desktop and remote
destinations receive calls
simultaneously.
• When you answer the call on
your desktop phone, the remote
destinations stop ringing, are
disconnected, and display a
missed call message.
• When you answer the call on
one remote destination, the
other remote destinations stop
ringing, are disconnected, and a
missed call message is shown on
the other remote destinations.
Then...
Return the handset to its cradle. Or press EndCall.
Press EndCall.
Press EndCall. If necessary, remove the call from hold first.
Basic Call Handling
For more information, see...
Prioritizing Critical Calls,
page 35.
Managing Business Calls Using a
Single Phone Number, page 37.
17