Cisco 7911G - IP Phone VoIP Phone Manual page 22

If you want to...
Place a call using Fast
Dial
Place a call using your
PAB
Tips
• You can dial on-hook without a dial tone (pre-dial). To pre-dial, enter a number, then go off-hook
by lifting the handset and press Dial.
• When you pre-dial, your phone tries to anticipate the number you are dialing by displaying
matching numbers (if available) from your Placed Calls log. This is called Auto Dial. To call a
number displayed with Auto Dial, scroll to it, press Dial, and go off-hook.
• If you make a mistake while dialing, press << to erase digits.
• If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system
administrator for more information.
• Your phone might be set up for international call logging, which is indicated by a "+" symbol on
the call logs, redial, or call directory entries. See your system administrator for more information.
14
Then...
Before using this option, your system
Note
administrator must configure this feature
and assign a service URL to the line
button. Contact your system administrator
for more information.
1. Press the Fast Dial line button.
2. Scroll to or press the index number to find
the entry.
3. Press Dial.
Note Before using this option, your system
administrator must configure this feature
and assign a service URL to the line
button. Contact your system administrator
for more information.
1. Press the PAB line button.
2. Access the contact and select the number.
3. Press Dial.
For more information,
see...
Configuring Fast
•
Dials on the Web,
page 55
Using Your
•
Personal Address
Book on the Web,
page 53
Configuring Fast
•
Dials on the Web,
page 55
Using Your
•
Personal Address
Book on the Web,
page 53
OL-15428-01