Answering A Call; Ending A Call - Cisco 7970 Phone Manual

Answering a Call

To answer a call, go-off hook. See the table below for details.
If you want to...
Answer with a headset
Answer with the speakerphone
Switch from a connected call to
answer a ringing call
Set up your phone to
automatically connect an
incoming call after a ring or two
Retrieve, or allow someone else
to retrieve, a held call on
another phone (such as a phone
in a conference room)
Use your phone to answer a call
that is ringing on another phone
Answer a priority call.
Send an incoming call directly to
the voice messaging system

Ending a Call

To end a call, hang up. See the table below for details.
If you want to...
Hang up while using the handset
Hang up while using the headset
Hang up while using the speakerphone Press
Hang up one call but preserve another
call on the same line
18
Then...
Press , if unlit.
Or, if is already lit, press Answer or
Press , Answer, or
Press Answer or . Doing so answers the new call and
automatically places the first call on hold. See the "Using Hold and
Resume" section on page 19 for more information.
Ask your system administrator to set up the AutoAnswer feature.
For more information, see the "Using AutoAnswer with a Headset
or the Speakerphone" section on page 30.
Use Call Park. See the "Storing and Retrieving Parked Calls"
section on page 24.
Use Call Pickup. See the "Redirecting a Ringing Call to Your
Phone" section on page 24.
Hang up the current call and press Answer. See the "Prioritizing
Critical Calls" section on page 28.
Press iDivert. The incoming call is automatically transferred to
your voice message greeting.
Then...
Return the handset to its cradle. Or press EndCall.
Press , if lit. Or, if you want to keep headset mode
activated (keep the button lit after hanging up), press
EndCall.
, or EndCall.
Press EndCall. If necessary, remove the call from hold first.
(flashing line button).
.
78-15630-02