Variable Loading Floor - Skoda YETI - 11-2009 Owner's Manual

82 Seats and Stowage
Pack static separation net
– Press the red button of the joint
– Put the separation net folded together in the bag and close it.
– Attach the bag with the aid of the plastic carabines to the eyes on the left and right
luggage compartment trim panel.
Installing and removing the static separation net behind the rear seats with variable
loading floor* ⇒ page 82 is carried out analogously as behind the rear seats without
variable loading floor. Use the lower fixing eyes on the carrier rails in order to attach
the carabines.
A ⇒ page 81, fig. 80
The opening
D
through the three-point seat belt ⇒ page 144.

Variable loading floor*

Remove variable loading floor
Fig. 81 Luggage compartment: fold up variable loading floor / remove variable loading floor
The variable loading floor makes it easier to handle bulky goods and creates an even
luggage compartment floor when the rear seat backrests are folded forward. The
maximum permissable surface load of the variable loading floor is 75 kg.
A
- so that it releases.
A
in the static separation net is designed to feed
Remove variable loading floor
– You can fold together the loading floor by moving in direction of arrow
⇒ fig.
81.
– Raise the floor in direction of arrow
– Pull on both sides of the locking levers in direction of arrow
– Pull the loading floor up and out in direction of arrow
– The installation of the variable loading floor is carried out in the reverse order.
Secure the variable loading floor in the raised position
– Fold up the hooks on the fastening strip in direction of arrow
– Fold up the variable loading floor behind the seat backrests of the rear seats.
– Fold down the hooks in direction of arrow
– Support the variable loading floor on the hooks folded downwards.
WARNING
Pay attention when installing that the carrier rails and the variable loading floor
are correctly fixed, otherwise the occupants are at risk.
Note
If the variable loading floor* is installed, no flexible storage compartment can be
installed.
A
1
A ⇒ fig.
81.
2
A ⇒ fig.
81.
3
A
.
4
A ⇒ page 79, fig.
1
A ⇒ page 79, fig.
as far as the stop
3
77.
77.