Auto Check Control - Skoda YETI - 11-2009 Owner's Manual

26 Instruments and Indicator/Warning Lights

Auto Check Control*

Car state
The Auto Check Control carries out a check of certain functions and vehicle compo-
nents. The check is performed constantly when the ignition is switched on, both when
the vehicle is stationary, as well as when driving.
Some operational faults, urgent repairs, service work or other information appear in
the display of the instrument cluster. The displays are shown with a red or yellow light
symbol depending on the priority of the message.
The red symbols indicate danger (priority 1) while the yellow symbols indicate a
warning (priority 2). Information for the driver may also appear in addition to the
symbols ⇒ page 29.
Shown in the menu Vehicle status, if there is at least one error message. After selecting
this menu the first of the error messages is displayed. Several error messages are
shown on the display under the message e.°g. 1/3
of a total of three error messages is displayed. The respective messages are displayed
one after the other in an interval of 5 seconds. Check as soon as possible the displayed
error messages.
As long as the operational faults are not rectified, the symbols are always indicated
again. After the first display, the symbols are indicated without information for the
driver.
If a fault occurs, a warning signal will also sound in addition to the symbol and text in
the display:
Fig. 25 Information display: Display of
operational fault
⇒ fig.
25. This indicates that the first
•
Priority 1 - three warning signals
•
Priority 2 - one warning signal
Red symbols
A red symbol signals danger.
– Bring the vehicle to a stop.
– Switch the engine off.
– Investigate the function indicated.
– Obtain professional assistance.
Meaning of the red symbols:

Engine oil pressure too low
Overheated clutches of the automatic gear-

box DSG*
Three successive warning signals will sound if a red symbol appears.
Fig. 26 Information display: Oil pressure
is low
⇒ page 33
⇒ page 38