Skoda YETI - 11-2009 Owner's Manual page 137

136 Communication
Load CDs
A
– Hold the button pressed and guide the CDs one after the other (maximum
A
A
6 CDs) into the CD case . The LEDs in the buttons
B
Loading a CD to one definite position
A
– Press on the button . The LEDs in the buttons
A
which are already assigned and flash in the case of free memory spaces.
A
– Touch the desired button
D
Ejecting a CD
A
– Briefly press on the button
C
now the LEDs light up in the buttons
– Touch the corresponding button
Ejecting all CDs
A
– Hold the button pressed for more than 2 seconds, in order to eject the CDs. All
C
CDs in the CD-changer are ejected consecutively.
Note
•
Always guide the CD into the CD-case
•
Never push the CD with force into the CD-case as the insertion is performed auto-
matically.
•
After loading a CD into the CD-changer, you must wait until the LED of the corre-
A
sponding button lights up. Then the CD-case
D
•
If you have selected a position, on which a CD is already located, this CD will be
ejected. Take out the ejected CD and load the desired CD.
A
are no longer flashing.
D
A
light up at the memory spaces,
D
A
and guide the CD into the CD-case
B
, in order to eject a CD. For assigned memory spaces,
A
.
D
A
. The CD is ejected.
D
A
with the printed side pointing upwards.
B
A
is free to load the next CD.
B
.