Skoda YETI - 11-2009 Owner's Manual page 23

22 Instruments and Indicator/Warning Lights
Outside temperature
The outside temperature appears in the display when the ignition is switched on.
If the outside temperature drops below +4°C, a snow flake symbol (warning signal for
ice on the road) appears in front of the temperature indicator and flashes for 10
seconds, then remains displayed together with the outside temperature
the same time an audible signal sounds. After pressing the rocker switch
⇒ page 21, fig. 19
windshield wiper lever
⇒ page 21, fig.
steering wheel 19, the function shown last is indicated.
WARNING
Do not only rely upon the information given on the outside temperature display
that there is no ice on the road. Please note that black ice may also be present
on the road surface even at temperatures around +4°C - warning, drive with
care!
Driving time
The driving time which has elapsed since the memory was last erased, appears in the
display. If you wish to measure the driving time as of a particular time, you must set the
memory to zero at this moment in time by pressing the button
⇒ page 21, fig. 19
wiper lever or the handwheel
⇒ page 21, fig. 19
wheel* for longer than 1 second.
The maximum distance indicated in both memories is 99 hours and 59 minutes. The
indicator is set back to null if this period is exceeded.
Fig. 20 The outside temperature
⇒ fig.
A
at the
A
A
or the button at the multifunction
C
A
on the windshield
B
A
on the multifunction steering
D
Current consumption
The current fuel consumption level is shown in the display in litres/100 km. This infor-
mation can help you to adapt your style of driving to the fuel consumption you wish to
achieve.
The display appears in litres/hour if the vehicle is stationary or driving at a low speed.
The indicated value will be updated every 0.5 seconds while you are driving.
Average fuel consumption
The average fuel consumption since the memory was last erased is shown in the
⇒ page 20, fig.
display in litres/100 km
style of driving to the fuel consumption you wish to achieve.
If you wish to determine the average fuel consumption over a certain period of time
you must set the memory to zero at the start of the measurement using the button
20. At
on the windshield wiper lever
multifunction steering wheel*
first 100 m you drive after erasing the memory.
The indicated value will be updated every 5 seconds while you are driving.
Note
The amount of fuel consumed will not be indicated.
Range
The estimated range in kilometres is shown on the display. It indicates the distance you
can still drive with your vehicle based on the present level of fuel in the tank for the
same style of driving.
The readout is shown in steps of 10 km. After lighting up of the indicator light for the
fuel reserve the display is shown in steps of 5 km.
The fuel consumption for the last 50 km is taken as a basis for calculating the range. If
you drive in a more economical manner from this moment on, the range will be
increased accordingly.
18. This information can help you to adapt your
⇒ page 21, fig. 19
or with the handwheel
⇒ page 21, fig.
19. A zero appears in the display for the
A
B
A
on the
D