Attaching Child Seat Using The "Top Tether" System - Skoda YETI - 11-2009 Owner's Manual

162 Transporting children safely
– Push the notched arms of the child seat into the locking eyes in direction of arrow
A
, until they are heard to lock in place
1
– Pull on both sides of the child seat!
One can mount a child safety seat using the "ISOFIX" system quickly, easily and reliably.
Please pay close attention to instructions from the manufacturer of the child safety
seat when installing and removing the seat.
Child seats fitted with the "ISOFIX" system can only be mounted and fixed in a vehicle
fitted with an "ISOFIX" system when these child seats have been released for this type
of vehicle according to the ECE-R 44 standard.
You can obtain child seats with the "ISOFIX" attachment system from specialist garages
who will also installed it as well.
Complete installation instructions are enclosed with the child safety seat.
WARNING
•
The locking eyes have just been developed for child safety seats which use
the "ISOFIX" system. You should therefore never attach other child safety seats,
seat belts or objects to the locking eyes - hazard!
•
Ask a specialist garage whether a child seat which you bought for another
vehicle is recommended for use in your vehicle before using a child seat with
"ISOFIX" system.
•
Certain child seats which use the "ISOFIX" system can be attached with
standard three-point seat belts. Please pay close attention to instructions from
the manufacturer of the child safety seat when installing and removing the seat.
Note
•
Child seats which use the "ISOFIX" system are currently available for children
weighing from 9 up to 18 kg. This corresponds to an age range of from 9 months to 4
years.
•
The child seats can also be fitted with the "Top Tether" system ⇒ page 162.
⇒ fig.
152.

Attaching child seat using the "Top Tether" system

The rear exterior seats and/or the middle seat (only valid for some countries) are
equipped as standard with the attachment system "Top Tether" at the rear of the seat
backrest for enhancing the child safety
Always perform the installation and removal of the child seat using the "Top Tether"
system as stated in the instructions from the manufacturer of the child seat.
WARNING
•
Attach the child seats with the "Top Tether" system only to the points
⇒ fig.
provided for this purpose 153.
•
On no account should you equip your vehicle, e.g. mount screws or other
anchorage points.
•
Pay attention to the important safety information regarding the use of child
seats.
Note
Store the remaining part of the belt for the "Top Tether" system in a textile pocket,
which is located at the child seat.
Fig. 153 Rear seat: Top Tether
⇒ fig.
153.