Variable Loading Floor* With Spare Wheel - Skoda YETI - 11-2009 Owner's Manual

Remove carrier rails
Fig. 82 Luggage compartment: Slacken check points / remove carrier rails
Install carrier rails
A
– Slacken the check points
B
⇒ fig.
driver 82.
A
– Grasp the carrier rail at the position
A
direction of arrow.
A
– Grasp the carrier rail at the position
A
arrow and take it out.
– The carrier rail on the other side of the luggage compartment can be removed in
the same way.
Install carrier rails
– Position the carrier rails on the sides of the luggage compartment.
– Press both check points on each carrier rail up to the stop.
– Check the attachment of the carrier rails by pulling it.
WARNING
Pay attention when installing that the carrier rails are correctly fixed, otherwise
the occupants are at risk.
Using the system Safety
on the carrier rails using the vehicle key or a flat screw-
⇒ fig. 82
A
and slacken it by pulling in the
1
A
, slacken it by pulling in the direction of
2
Driving Tips

Variable loading floor* with spare wheel*

Use variable loading floor
Fig. 83 Luggage compartment: Fold the side parts of the loading floor / example for using the
variable loading floor
The variable loading floor makes it easier to handle bulky goods and creates an even
luggage compartment floor when the rear seat backrests are folded forward. The
maximum permissable surface load of the variable loading floor is 75 kg.
You can fold down the side parts of the loading floor in direction arrow in order to
enlarge the space foreseen for stowing items of luggage
Note
If the variable loading floor with spare wheel* is installed, no flexible storage compart-
ment can be installed.
•
The variable loading floor with spare wheel* can be secured in the raised position
in the same way as the variable loading floor without spare wheel* ⇒ page 82, "Secure
the variable loading floor in the raised position".
General Maintenance Breakdown assistance
Seats and Stowage 83
⇒ fig.
83.
Technical Data