Skoda YETI - 11-2009 Owner's Manual page 82

– Place the cover in the horizontal position.
– Pull the luggage compartment cover out of the holders
the bottom side of the luggage compartment cover in the front area.
– Fold the slackened front part of the luggage compartment cover over the head
restraints of the rear seats.
– Slightly tilt the luggage compartment cover and remove it to the rear.
– Install again by pushing the luggage compartment cover forwards into the holder
A
and hanging the support straps
2
You can stow the removed luggage compartment cover behind the rear seat backrest.
The procedure of installing or removing is identical.
The luggage compartment cover is foreseen for storage of small objects of up to 2.5 kg.
in weight.
WARNING
No objects should be placed on the luggage compartment cover, the vehicle
occupants could be endangered if there is sudden braking or the vehicle
collides with something.
Caution
Please ensure that the heating elements of the rear window heater are not damaged
as a result of objects placed in this area.
Using the system Safety
A
to the rear or press on
2
A
on the boot lid.
1
Driving Tips
Static separation net*
Fig. 80 Use of the static separation net behind the rear seats / behind the front seats
Install the static separation net behind the front seats or the rear seats.
Installing the static separation net
– Remove the luggage compartment cover ⇒ page 80.
– Take the separation net out of the bag.
– Unfold both parts of the cross rod until they are heard to engage.
– Insert the cross rod into the mount
forward. In the same way, fix the cross rod to the other side of the vehicle, mount
A ⇒ fig.
80.
B
A
– Hang the carabines at the ends of the strap into the fixing eyes behind the rear
C
or front seats.
– Pull the strap through the tensioning clasp, first of all on the one side and then on
the other side.
Remove the static separation net behind the rear seats
– Slacken the bands on both sides and take off the carabines
– Push the cross rod first of all on the one side and then on the other side towards
the rear.
– Take the cross rod out of the mounts
General Maintenance Breakdown assistance
Seats and Stowage
A
first on the one side and push the cross rod
B
A ⇒ fig.
80.
C
A
.
B
Technical Data
81