Skoda YETI - 11-2009 Owner's Manual page 134

Dialogue
The period, in which the telephone system is ready to receive voice commands and
carry out the voice commands, is called DIALOGUE. The system gives audible feedback
and guides you if necessary through the relevant functions.
You can start or end the dialogue at any time by pressing the PTT button
⇒ page 132, fig. 129
adapter*
end it with the voice command CANCEL.
The dialogue is always automatically ended after carrying out an operation, e.g. after
erasing the name from the phonebook.
When receiving an incoming call, the dialogue is immediately interrupted and you can
accept the call by pressing the button°
⇒ page 131 or by pressing the button for receiving a call directly on your telephone.
If a voice command is not detected, the system answers with "Sorry?" and a new entry
can be performed. After the 2nd error the system repeats the aid. After the 3rd error
the answer "Cancel" is given and the dialogue is ended.
Optimum understanding of the voice commands depends on the following
factors:
•
Speak with a normal tone of voice without intonation and excessive voice pauses.
•
Avoid insufficient articulation.
•
Close the doors, windows and sliding roof, in order to reduce or stop disturbing
exterior noise.
•
It is recommended to speak louder at higher speeds, so that the tone of your voice
is louder than the increased surrounding noise.
•
During the dialogue avoid additional noise in the vehicle, e.g. simultaneously
talking occupants.
•
Do not speak, if the system makes an announcement.
•
The microphone for voice control is directed to the driver and front passenger.
Therefore the driver and the front passenger can operate the equipment.
Using the system Safety
or on the multifunction steering wheel* ⇒ page 131 or

on the multifunction steering wheel*
Driving Tips
Voice commands
The digits zero to nine are permitted. The system detects no continuous digit combi-
nations such as twenty-three, but only individually spoken digits (two, three). After
each order of digits (separation through brief voice pause) the detected digits are
repeated.

on the
The telephone number can be entered as an interconnected spoken row of digits
(complete number), in the form of order of digits (separation through a brief voice
pause) or through individually spoken digits. After each order of digits (separation
through brief voice pause) the detected digits are repeated.
If you enter more than 20 digits, the system announces: "The number is too long".
Additionally for international calls a Plus (+) has to be entered in front of the 20 digits.
The voice control is possible in the following languages:
Czech, English, German, French, Italian and Spanish.
Voice commands
ENTER PIN/PIN CODE
DIAL NUMBER
REDIAL
General Maintenance
Communication
Activity
After this command the PIN code of the mobile phone
can be entered ⇒ page 134.
After this command a phone number can be entered
which establishes a connection to the requested party.
After this command the last selected telephone
number is selected again.
Breakdown assistance Technical Data
133