Skoda YETI - 11-2009 Owner's Manual page 22

Single-trip memory (memory 1)
The single-trip memory collates the driving information from the moment the ignition
is switched on until it is switched off. New data will also flow into the calculation of the
current driving information if the trip is continued within 2 hours after switching off
the ignition. The memory will be is automatically erased, on the other hand, if the trip
is interrupted for more than 2 hours.
Total-trip memory (memory 2)
The total distance driven memory gathers data from any number of individual jour-
neys up to a total of 99 hours and 59 minutes driving or 9.999 kilometres driven. The
memory is deleted when either of these limits is reached and the calculation starts
from anew.
The total-trip memory will not, contrary to the single-trip memory, be deleted after a
period of interruption of driving of 2 hours.
Note
All information in the memory 1 and 2 is erased if the battery of the vehicle is
disconnected.
Operating with the buttons on the windshield wiper lever and on
the multifunction steering wheel*
Fig. 19 Multi-functional indicator: Control elements
A
The rocker switch and the button
A
⇒ fig. 19
lever on the left. Switching over and resetting is performed with the hand-
A ⇒ fig. 19
wheel on the multifunction steering wheel.
D
Using the system Safety
A
are located in the grip of the window wiper
B
Driving Tips
Instruments and Indicator/Warning Lights
Selecting the memory
– After briefly pressing the button
A
pressing the button on the multifunction steering wheel, you can select the
D
desired memory.
Selecting the functions with the help of the windshield wiper lever
– Press the top or bottom rocker switch
call up in sequence the individual functions of the multi-functional indicator.
Selecting the functions with the help of the multifunction steering
wheel
A
– By pressing the button , you can call up the menu of the multi-functional indi-
C
cator.
A
– Turn the handwheel upwards or downwards. In this way, call up in sequence
D
the individual functions of the multi-functional indicator.
– Short-term pressing of the button
Setting function to zero
– Select the memory you want.
A A
– Press the button or for more than 1 second.
B D
The following readouts of the selected memory will be set to zero with the button
on the windshield wiper lever or with the button
wheel:
•
average fuel consumption,
•
distance driven,
•
average speed,
•
Driving time.
You can only operate the multi-functional indicator when the ignition is switched on.
After the ignition is switched on, the function displayed is the one which you last
selected before switching off the ignition.
General Maintenance Breakdown assistance
A
on the windshield wiper lever or by briefly
B
A
for longer than 0.5 seconds. In this way,
A
A
allows to select the highlighted function.
D
A
on the multifunction steering
D
Technical Data
21
A
B