Table of Contents
Advertisement
166 Storage space and interior equipment ›
Stowing the cover under the variable loading floor
›
Remove the variable loading floor.
Or:
›
Unfold the variable loading floor in the upper posi-
tion and lift it in the rear area.
front.
Variable loading floor in the boot
Setting the position
The maximum load of the variable loading floor is
75 kg.
Set the variable loading floor to the upper or lower
position
Variable loading floor in the boot
›
Insert the cover into
the recesses of the
side partitions and fold
the free part forwards
using the handle.
If the roll-up cover and
the multifunction bag
are stowed at the same
time, the roll-up cover
must cover the multi-
function bag at the
›
Lift the variable loading
floor and pull it to-
wards you so that it is
lowered in the front
area onto the floor
covering in the boot.
›
To set in the upper po-
sition, position the vari-
able loading floor in the
front area on area
.
A
›
To set in the lower po-
sition, position the vari-
able loading floor in the
front area on space
.
B
Fasten the raised variable loading floor in the up-
per position
NOTICE
Before closing the boot lid, remove the hook from
the frame.
Removing and inserting
›
Lift the variable loading floor up to a distance of
about 15 cm below the boot cover and then re-
move it.
›
Insertion takes place in reverse order.
Partition in the boot
Removing and inserting
Removing and inserting the partition
The partition prevents the cargo from slipping.
The maximum load for the partition is 10 kg.
›
Press the variable load-
ing floor forward and
hang up.
›
Lift the rear section of
the variable loading
floor.
›
Secure the raised vari-
able loading floor to
the frame of the boot
lid with the hook.
Advertisement
Table of Contents
